McLaughlin Auctioneers LLC, mc-bid Internet Auctions
Bill (Roger) Worth Online Estate Auction - Auction Closes Tuesday May 26, 2020 at 6:00 PM.

Item Description
500.BIDDING PROCEDURE :
The auction will start to close at 6:00 pm CST on Tuesday  May 26th, 2020. The close will be staggered 3 lots per minute. In addition "Extended Bidding Terms" will apply, which means items that have bids placed within 2 minutes of its closing time, the time will extend for an additional 2 minutes. This will continue until there is no activity for 2 minutes. Some Items may also have group endings meaning that the entire group will remain open until no bids are received for 2 minutes

Please read entire terms regarding payment requirements and Buyer's Premium

AUCTION REMOVAL
Wednesday May 27st 9:00 AM to 4:00 PM by appointment

Winning Bidders Will need to Schedule Removal with McLaughlin Auctioneers


See details in Terms and Conditions

501.2012 GMC Savana Van, VIN # 1GD374CG5C1900377

Year: 2012
Make: GMC
Model: Savana
Vehicle Type: Van
Mileage: 114,128
Plate:
Body Type: 2 Door Cutaway
Trim Level: Base 177 in. WB
Drive Line: RWD
Engine Type: V8, 6.0L; FFV
Fuel Type: Gasoline/E85
Horsepower:
Transmission:
VIN #: 1GD374CG5C1900377

Features and Notes:
2012 GMC Cube Van. 16' van body, 95" interior width, 6' 8" interior height. Roll up rear door.  Includes 10' aluminum loading ramp.
This truck is in good condition and has been well cared for. 
NOTE: TOOL BOXES AND CABINETS PICTURED ARE BEING SOLD SEPARATELY AND NOT INCLUDED WITH THE TRUCK.
Sale of this item is subject to the sellers approval.


502.2004 Chrysler Sebring Passenger Car, VIN # 1C3EL75R94N414243

Year: 2004
Make: Chrysler
Model: Sebring
Vehicle Type: Passenger Car
Mileage: 56,918
Plate:
Body Type: 2 Door Convertible
Trim Level: GTC
Drive Line: FWD
Engine Type: V6, 2.7L; DOHC 24V
Fuel Type: Gasoline
Horsepower:
Transmission:
VIN #: 1C3EL75R94N414243

Features and Notes:
2004 Chrysler Sebring GTC Convertible.  Less than 57,000 original miles! Leather interior. has a new boot for the top.  Very nice car! 
Sale of this car is subject to the sellers approval.

503.Remline XQL Series 13 drawer rolling cabinet tool box. 
42" W x 43" H x 18" Deep. 
This item is the lower cabinet only. The top tool chest is being sold separately. 

503A.Remline XQL Series 10 Drawer Tool Chest. Flip up top. 
42" W x 21" H x 18" Deep. 
Top tool chest only. Roller cabinet is being sold separately.

504.Custom built storage cabinet. Constructed from soft maple wood, with Baltic birch back.  Drawers are 24" x 24" x 5" dovetail boxes with attached fronts, and 100#  1" over travel slides.  This was used for tool storage inside of the truck and does have some scratches and dings.  Measures 48" W x 53" H X 24" D

505.Custom built  8 drawer cabinet. Constructed from soft maple wood, with Baltic birch back. Drawers are 24" x 24" x 5" dovetail boxes with attached fronts, and 100# 1" over travel slides. This was used for tool storage inside of the truck and does have some scratches and dings. Measures 27" W x 54" H x 26 D

506.Werner ST7412 12' fiberglass step ladder. Dual sided steps.

507.Werner T7210 10' Fiberglass Step Ladder. Dual sided steps.

508.Werner 6' Fiberglass Ladder. Dual sided steps.

509.Werner D6228-2  28' Fiberglass extension ladder.

510.18' Alluminum extension ladder.

510A.FOLDING PORTABLE LADDER

511.Steel Scaffold. 3 sections, includes 5 cross supports sections, 4 wheels, 2 leveling stands, and 10' 2x12 laminated plank.

511A.7' Aluminum framed scaffold plank. 

512.4' Work Platform

513.Makita 12" Miter Saw.  Model LS1216L.  Appears to be in like new condition.

514.Makita 10" sliding miter saw.  Model LS1019L  Appears to be in like new condition.

515.DeWalt Folding miter box saw stand.

516.Dewalt folding miter saw stand with wheels.

517.Makita folding miter saw stand.

518.Dewalt DW734 Portable Planer.

519.Rockwell 37-220 6" Planer

520.Dewalt Emglo Portable Air Compressor

521.Makita Model MAC5200 Portable Air Compressor.

522.CN-350B HEAVY-DUTY STRIP NAILER WITH MANUAL

523.SENCO FASTENING SYSTEMS SFN1 NAILER

524.OMER 90.38 NAILER

525.HITACHI NV45AB 1 3/4" COIL NAILER

525A.HITACHI N5008AC 2" STAPLER

526.SENCO 18 GA MODEL SLS18MG FINISH STAPLER IN CASE WITH MANUAL

527.SENCO FINISH PRO 23SXP HEADLESS PIN 23 GA NAILER WITH 1" 25MM HEADLESS PINS IN CARRYING CASE WITH MANUAL

528.PASLODE PNEUMATIC 18 GA BRAD NAILER IN CARRYING CASE MODEL T200-F18 WITH MANUAL

529.PASLODE 16 GA STRAIGHT PNEUMATIC FINISH NAILER IN CARRYING CASE WITH MANUAL MODEL T250S-F16

530.CHICAGO PNEUMATIC AUTO TOOL 672 ZIP-GUN MODEL A WITH AIR HOSE AND COUPLING ASSEMPLY AND CAMPBELL HAUSFELD 1/4" AIR RATCHET

530A.PORTER CABLE ROBOTOOLZ SELF LEVELING, REMOTE-CONTROLLED, SIMULTANEOUS LEVEL & PLUM ROTATIONAL LASER SYSTEM MODEL RT-7690-2 WITH STAND. COMES IN CARRYING CASE WITH MANUAL

531.BOSCH GLL3-80 LASER LEVEL IN CARRYING CASE

532.PAIR OF HAMMER STAPLERS, HITACHI & DUO-FAST

533.3 SETS OF STAPLERS. ARROW FASTNER CO MODEL -25M, DUO-FAST SUPER-SURESHOT AND DUO-FAST MODEL CS-5000

534.DW130 DEWALT 1/2" REVERSING DRILL

535.DW292 DEWALT 1/2" IMPACT WRENCH

536.DW272 DEWALT VSR DRYWALL SCREWDRIVER

537.PORTER CABLE DOUBLE INSULATED ELECTRONIC EHD DRYWALL DRIVER MODEL 6645

538.BOSCH 1943LED 120V AC HEAT GUN SN 0023626

539.SENCO DURASPIN SCREW FASTENING SYSTEM 2" / 3" ATTACHMENT SG2500 IN CARRYING CASE WITH MANUAL - DECKING SCREW GUN

540.SENCO DURASPIN SCREW FASTENING SYSTEM DS200-AC - DRYWALL WITH CARRYING CASE AND MANUAL

541.BOSTITCH PN100K INDUSTRIAL HIGH SPEED IMPACT NAILER - PALM NAILER WITH CARRYING CASE AND MANUAL

542.DEWALT DW423 RANDOM ORBIT PALM SANDER WITH CARRYING CASE AND MANUAL

543.PORTER CABLE MODEL 360 BELT SANDER WITH MANUAL

544.BLACK & DECKER 7 1/4" WORM DRIVE SAW NO. 3051 WITH MANUAL

545.BOSCH HAMMER DRILL BULLDOG 1124VSR IN CARRYING CASE

546.MAKITA JIGSAW MODEL 4340FCT IN CARRYING CASE WITH ADDITIONAL JIGSAW BLADES

547.BOSCH 3 1/4" PLANER 3365 WITH LEFT OR RIGHT CHIP EJECTION

548.MILWAUKEE 3/8" RIGHT ANGLE DRILL WITH BATTERY AND CHARGER IN CASE WITH MANUAL

549.FEIN MULTIMASTER OSCILLATING SAW WITH CARRYING CASE AND MANUAL

550.MAKITA 4" DISC GRINDER

551.WELLER 8200N SOLDERING GUN WITH CARRYING CASE

552.DUO-FAST ELECTRIC TACKER WITH STAPLES IN CARRYING CASE

552A.MILWAUKEE 5625-20 ROUTER - NEW - NEVER USED - NO BOX - COMES WITH MANUAL

553.PORTER CABLE SPEED-MATIC MODEL 5371 ROUTER WITH MANUAL

554.ROCKWELL MODEL 1502 ROUTER WITH MANUAL

555.PORTER CABLE MODEL 7309 LAMINATE TRIMMER BASE TYPE ONE

556.PORTER CABLE MODEL 7399 DOUBLE INSULATED MISSING DEPTH GUAGE LAMINATE TRIMMER

557.ROCKWELL MODEL 3102 OFFSET LAMINATE TRIMMER BASE

557A.PORTER CABLE DOUBLE INSULATED PLATE JOINER MODEL 555 WTH METAL CARRYING CASE AND MANUAL

558.BOSCH ROTOZIP MODEL R72 WITH FLEX SHAFT ATTACHMENT

559.BALDOR GRINDER BUFFER - ALLOY DIECAST

560.TEXTSPRAY MODEL RTX1250 INTERIOR TEXTURE SPRAYER WITH HOSES, SPRAY GUN, AND  MANUAL

561.TELPRO PANEL LIFT DRYWALL LIFTER MODEL 138-2 WITH MANUAL

562.MARSHALLTOWN SKYWALKER STILTS 18-30"

563.PAIR GOLDBLATT TOOL COMPANY 12" MUD HAWKS

564.HALBOARD 24" DRYWALL BLADE

565.LARGE ASSORTMENT OF DRYWALL TOOLS

566.GOLDBLATT PATTERN PISTOL TEXTURE GUN WITH TWO HOPPERS

567.TEXTURE GUN WITH HOPPER

568.JOHNSON ROCK RIPPER SCORING SQUARE, RED DEVIL SQUARE, GOLDBLATT SQUARE

569.CORNER BEAD CRIMPING TOOL, MULTIPLE RASPS AND SANDERS FOR DRYWALL

570.IRWIN QUICK-GRIP 48" BAR CLAMPS

571.IRWIN QUICK-GRIP 6" BAR CLAMPS

572.IRWIN QUICK-GRIP 18" BAR CLAMPS

573.2 PAIR IRWIN QUICK-GRIP BAR CLAMPS 18" & 12"

574.KREG XL FACE CLAMP 10" REACH

575.LOT OF 10 - 6" TOOL SHOP LOCKING CLAMPS

575A.12" HEAVY C-CLAMP

576.LOT OF ADJUSTABLE CLAMPS: 1 1/2", 2" 3" & 4" - DOUBLE ADJUSTABLE AND MORE

577.PONY 8510 CABINET CLAWS

578.4 SETS OF PIPE CLAMPS AND 3-48" BARS

579.STABILA LEVEL 78" MADE IN GERMANY

580.STABILA LEVEL 48" MADE IN GERMANY

581.STABILA LEVEL 24" MADE IN GERMANY WITH CARRYING CASE

582.STABILA LEVEL 16" MADE IN GERMANY

583.MASTER LEVEL 36"

584.2 STANLEY LEVELS 24" & 28"

585.3 LEVELS: STABLILA TORPEDO LEVEL 10", STANLEY AND MORE

586.SITE LEVEL - SCOPE WITH CASE

587.THE ORIGINAL 3RD HAND HD FASTCAP - ALL PIECES AS SHOWN IN PICTURE

588.28" - 60" UPPER HAND - THE ORIGINAL 3RD HAND HD - ALL PIECES AS SHOWN IN PICTURE

589.TWO RIGID CHAIN WRENCHES 2 1/2" PIPE

590.TWO RIGID PIPE WRENCHES 18" AND 24"

591.RIGID TOOLS - PIPE WRENCH AND MONKEY WRENCH

592.GROUP OF 4 PIPE WRENCHES - (2) 14", (1) 10" AND (1) 8"

593.CRAFTSMAN 26 PIECE COMBINATION WRENCH SET

594.PROTO CHALLENGER SOCKET SET AND RATCHET

595.PROTO CHALLENGER SOCKET SET AND RATCHET

596.S-K SOCKET SET IN METAL BOX

597.DEEP IMPACT SOCKET SET 3/8"-1"

598.MISCELLANEOUS SOCKETS AND RATCHETS

599.JET 48 PIECE TAP & DIE SET

600.3 CHANNEL LOCK ADJUSTABLE PLIERS AND IRWIN VICE GRIP PLIERS

601.LARGE ASSORTMENT OF SCREWDRIVERS

601A.LARGE ASSORTMENT OF SCREWDRIVERS

602.LARGE ASSORTMENT OF CRESCENT WRENCHES - SOME CRAFTSMAN INCLUDED

603.LARGE CRESCENT WRENCHES AND ADJUST-A-BOX TOOL

604.GROUP OF LINEMAN'S PLIERS AND NIPPERS

605.YUASA DIAL CALIPER

606.GROUP OF TINSNIPS AND SCISSORS

607.GROUP OF VISE GRIP PLIERS

608.GROUP OF WIRE SNIPPERS

609.27" LONG AXE WITH LEATHER BLADE COVER WITH SNAP

610.CARPENTER'S HALF HATCHET WITH NAIL PULLING SLOT

611.TWO STANLEY HAMMERS

612.TWO FRAMING HAMMERS

613.(2) BALL PEEN HAMMERS AND (1) SLEDGE HAMMER

614.GROUP INCLUDING WRENCHES, SOCKETS, RATCHETS - SOME CRAFTSMAN, S-K, SNAP-ON AND MORE

615.ASSORTED NAIL PULLERS - SOME LOOK VINTAGE

616.BOX OF ASSORTED CHISELS AND NAIL SETS AND MORE

617.LOT OF STANLEY (AND OTHER) CHISELS

618.FIRE HYDRANT WRENCH AND CURB STOP WRENCH

619.KESON 200' TAPE MEASURE

620.(2) TAPE MEASURES - LUFKIN 100' AND 100' FIBERGLASS

621.STARRETT PRO SITE SERIES MITER SAW PROTRACTOR NO 505A-12

622.STARRETT PRO SITE SERIES MITER SAW PROTRACTOR NO 505A-12

623.TWO STANLEY 45.011 SQUARES

624.SQUARES, ZIG-ZAG LUFKIN WOOD RULER, EMPIRE MAGNETIC POLYCAST PROTRACTOR

625.(3) ROOFING HAMMERS

626.(2) MASONRY HAMMERS

627.GROUP OF RUBBER MALLETS AND SMALL HAMMER

628.RIGID TUBING BENDERS

629.BO-WRENCH PANELLING TOOL

630.POP RIVETS AND RIVETERS

631.DEWALT DRILL BIT SET

632.HANSON DRILL BIT SET - METAL CASE

633.BOX OF ASSORTED DRILL BITS - SEE MEASUREMENT SHOWN

634.BOX OF WOOD DRILL BITS - ASSORTED SIZES

635.BOX OF MISC DRILL BITS

636.HANDYMAN BRACES AND BITS

637.FORSTNER BITS AND ROUTER BITS

638.BOX OF ASSORTED SIZE ALLEN WRENCHES

639.TWO WOOD PLANERS

640.LEATHER PUNCH, K-D NO 205 BATTERY TERMINAL PLIERS AND PLIERS

641.CHALK AND CHALK LINE REELS

642.ASSORTED STRIPPER AND RASP TOOLS

643.WOOD FILES AND RASP

644.MITER BOX STAND AND SAWS

645.LARGE 2" TOW STRAP AND COME-ALONG

646.E-TRACK BRACKETS AND TIE DOWN STRAPS

646A.E-TRACK HOOKS

647.12" CARBIDE SAW BLADES - GOOD USED CONDITION

648.10" CARB IDE SAW BLADES - GOOD USED CONDITION

649.C24N MASONRY BLADES, CARBIDE SAW BLADES - GOOD USED CONDITION, ASSORTED SIZES

650.PANEL CARRIERS / GORILLA GRIPPER

651.APPLIANCE AND FURNITURE MOVING SKIDS

652.FLOORING INSTALLATION TOOLS AND SPACERS

653.ROOF JACKS (4)

654.12 VOLT WINCH AND TRAILER JACK AND CABLE - CONDITION UNKNOWN

655.PINTAL HITCHES

656.ROCKWELL DOVETAIL TEMPLATE

657.IGLOO KOOLMATE 36 THERMOELECTRIC COOLER & WARMER 36 QT CAPACITY

658.CABINET DOOR MAKING JIG - ONE WING ROUTER TEMPLATE

659.POWER PRO CAULKING GUN AND OTHER INDUSTRIAL CAULKING GUNS

660.ROCKWELL HINGE BUTT TEMPLET DOOR HANGING KIT

661.TWO 24" LONG HANGING TOOL MAGNETS

662.TWO 24" LONG HANGING TOOL MAGNETS

663.TWO 24" LONG HANGING TOOL MAGNETS

664.TWO 24" LONG HANGING TOOL MAGNETS

665.TWO 24" LONG HANGING TOOL MAGNETS

666.TWO 24" LONG HANGING TOOL MAGNETS

667.TWO 24" LONG HANGING TOOL MAGNETS

668.FIVE 13" LONG HANGING TOOL MAGNETS

669.HOMAK STEEL TOOL CASE WITH HANDLES ON TOP AND SIDE - MEASURES 32" LONG X 9" DEEP X 9" HIGH

670.STRONGWAY 20 TON QUICK LIFT BOTTLE JACK

671.HYDRAULIC TROLLEY JACK 2-TON

672.14 1/2" LONG DRAW KNIFE

673.ASSORTMENT OF HACKSAWS

674.COPING SAWS, UTILITY KNIVES AND EXTRA BLADES

675.LARGE TILLMAN LEATHER WELDING SHIRT COVER AND WELDING GLASSES, SHIELD

676.HOLE SAWS AND MISC HAND SAWS

677.3 SECTIONS OF CHAIN 8, 15' OF 3/8" CHAIN, 8' OF 5/16 CHAIN AND 13' OF 1/4" CHAIN WITH HOOKS

678.3 - 29" LONG HAND SAWS

679.METAL FIRST AID KIT WITH ITEMS SHOWN

680.ASSORTMENT OF HOLE SAWS

681.RETRACTIBLE TROUBLE LIGHT CORD 30' LONG, HANGS

682.ASSORTMENT OF CLEVIS HOOKS AND A HAY HOOK

683.LEATHER KNEE PADS, OTHER KNEE PADS, LEATHER WORK BELTS, APRONS AND MORE

684.THE STAIR WIZARD STAIR TREAD AND RISER GAUGE WITH MANUAL

685.BENCH SAW FEED TOOL, STRING FEED, JIG SAW BLADES AND MORE

686.WALL MOUNT CLAMP HOLDER 31"

687.ROCKER WOOD WORKING AND HARDWARE HANGING TOOL HOLDER 24"

688.HEAVY H.K. PORTER #3 - 36" BOLT CUTTER

689.MASTERCRAFT POLY & STEEL DRY & WET/DRY VACUUM CLEANER WITH ALL ATTACHMENTS, BAG AS SHOWN. COMES WITH MANUAL

690.TRADESMAN HELPING HAND II WORK SUPPORT STANDS

691.BLACK & DECKER WORKMATE BENCH WORK BENCH

692.STOREHORSE FOLDING SAW HORSE

693.HEAVY BARREL DRUM LIFT ATTACHMENT

694.HEAVY ECOA BARREL DRUM LIFT ATTACHMENT

695.CABINET HARDWARE ADJUSTABLE JIG

696.WORKMATE HOBBYCRAFTER 8" BENCH TOP WORK CENTER AND VISE AND MAGNETIC BASE DIAL INDICATOR HOLDER

697.GENERAL DRILL GUIDE, DREMEL ATTACHMENT, STANLEY DOWLING JIG NO. 59 AND MORE

698.CUSTOM BUILT TOOL STORAGE RACK. IT WAS MADE TO USE AIRLINE FITTINGS TO HANG PNEUMATIC NAILERS AND TOOLS FROM INSIDE OF CONSTRUCTION TRUCK.  FITTINGS ARE BEING SOLD SEPARATELY. 

699.MULTIPLE AIR HOSE FITTINGS - MANY SIZES

700.DRYWALL MIXING TOOLS

701.STANLEY PROMILE TOOL CHEST FULL - SEE ALL PICTURES - TOOL CHEST ON ROLLERS

702.METAL LATCHABLE TOOL ORGANIZER WITH HANDLE 13 1/4" X 9 1/2" X 2 1/4" HIGH - FULL - SEE PICTURES

703.METAL LATCHABLE TOOL ORGANIZER WITH HANDLE 12" X 18" X 3" HIGH - FULL - SEE PICTURES

704.METAL LATCHABLE TOOL ORGANIZER WITH HANDLE 12" X 18" X 3" HIGH - FULL - SEE PICTURES

705.METAL LATCHABLE TOOL ORGANIZER WITH HANDLE 12" X 18" X 3" HIGH - FULL - SEE PICTURES

706.ADDRESSOGRAPH HEAVY STEEL ORGANIZER WITH 12 EASY SLIDE DRAWERS AND DROP FRONT - 24" DEEP X 17 1/2"WIDE X 14" HIGH - FULL - SEE PICTURES

707.4-DRAWER BLACK FILE CABINET - NO KEY

708.LONG HANDLED TOOLS - SHOVELS

709.LONG HANDLED TOOLS - SHOVELS

710.LONG HANDLED TOOLS - SHOVELS

711.SHINGLING TOOL

712.TILE CUTTER, HEAVY SCRAPERS - NOTE PICTURES - DAMAGE TO SCRAPERS

713.TIRE IRON AND HEAVY PULLER

713A.CONDUIT BENDER

714.TAMPER

715.PROGRIP TAMPER

716.SNOW SHOVEL

717.SCOOP SHOVEL

718.SLEDGE HAMMER AND WEDGE

719.PICK AXE

720.GARDEN TOOLS - EDGER, RAKE, HOE

721.PROFESSIONAL GRADE POST HOLE DIGGER

722.POST HOLE DIGGER

723.SHOP BROOM

724.PAINT POLE EXTENSIONS

725.LONG HANDLE POLE SAW

726.90' HEAVY DUTY 12-3 WIRE EXTENSION CORD

727.70' HEAVY DUTY EXTENION CORD 12-3 WIRE

728.65' 4-OUTLET RECEPTACLE EXTENSION CORD

729.80' HEAVY DUTY EXTENSION CORD

730.50' HEAVY DUTY EXTENSION CORD

731.50' 12-3 WIRE WITH DUAL 20 AMP RECEPTACLE BLOCK EXTENSION CORD

732.(3) 50' LONG HEAVY DUTY EXTENSION CORDS

733.(3) 50' LONG HEAVY DUTY EXTENSION CORDS

734.(3) 25' LONG HEAVY DUTY EXTENSION CORDS

735.100' LONG EXTENSION CORD WITH 25' LONG EXTENSION CORD

736.4 RECEPTACLE PIGTAIL EXTENSIONS

737.LARGE LOT OF EXTENSION CORDWIRE (MISSING ENDS)

738.50' LONG 300 PSI 3/8" AIR HOSE

739.DRYWALL SANDING STICK WITH EXTRA SCREENS

740.LARGE PVC PIPE WITH CAP, LONG STEEL STRAIGHT EDGE, CONDUIT, COPPER PIPE, PLUMBING PIPE AND MORE! STRAIGHT EDGE STEEL IS 8' LONG

741.HEAVY DUTY WHEEL BARROW

742.MILWAUKEE TRUCK DIVISION HAND CART

743.BROOKINS EASE OVER CREEPER

744.XTREME GARAGE 30" X 18" INCH HARDWOOD DOLLY

745.XTREME GARAGE 30" X 18" INCH HARDWOOD DOLLY

746.GROUP OF 6' SLINGS

747.STANLEY CORNER CLAMPS AND CLAMPS

748.HEAVY DUTY JUMPER CABLES

749.BUCKET OF 6 1/2" LONG PEG HOOKS

750.HUMANE WAY RABBIT TRAP - LIVE TRAP

751.TRIPP LITE MODEL MV-2 SAFETY ORANGE LIGHT

752.BURGESS BUG KILLER - PROPANE OUTDOOR FOGGER

753.TWO KREG JIGS, POCKET-HOLE SCREWS AND OTHER HARDWARE

754.LITTLE GIANT CONDENSATE REMOVAL PUMPO IN ORIGINAL BOX

755.JOHNSON ACCU ROD & REEL WITH FISHING ITEMS, MARKER BUOY, WEIGHTS, HOOKS AND MORE!

756.1/4" CHAIN WITH CLEVIS HOOKS, CHAIN BINDER - CHAIN APPROXIMATELY

757.OFFICIAL PEE-WEE HERMAN, PEE-WEE'S PLAYHOUSE SCOOTER 36" LONG X 29" HIGH WITH FLAG, REFLECTOR AND SPINNER!!!

758.HE-MAN BATTLE CYCLE BY MURRAY, SMALL BOYS BIKE WITH TRAINING WHEELS 38" LONG X 26" HIGH

759.GROUP OF CONCRETE TROWELS AND CONCRETE FINISHING BRICK

760.ORIGINAL BUCKET SEAT FULL OF HARDWARE! SEE ALL PICTURES

761.PARTIAL BOX OF BTX FLAT HEAD WOOD SCREWS - INTERIOR EZXTERIOR CORROSION RESISTANT ACQ & PRESSURE TREATED COMPATIBLE

762.PARTIAL BOX OF GRABBER PROFESSIONAL QUALITY DRYWALL SCREWS 6 X 1 5/8" BUGLE HEAD @2 PHILLIPS RECESS PHOSPHATE PLATING

763.PARTIAL BOX OF SCORPION COARSE THREAD DRYWALL SCREWS 6 X 1 1/4" PHOSPHATE PLATING

764.PARTIAL BOX - 8 SMOOTH GALVANIZED STERLING NAILS

765.NEARLY FULL BOX AIR NAIL CLIPS

766.NEARLY FULL BOX HITACHI ROOFING NAILS WIRE COIL 1 3/4" X .120 GALVANIZED SMOOTH SHANK

767.NEARLY FULL BOX DUO-FAST RESINBOND COLLATION 20 DEGREE FULL ROUND HEAD COLLATED FRAMING NAILS 3 1/4" X .131

768.TWO BOXES OF 7/16" SHEATHING CLIPS

769.BOX WITH MANTY 1/2" REBAR STANDS - LABELS READ 2 1/2" RE-ROD CHAIR

770.LARGE GROUP OF CARRIAGE BOLTS, THICK BOLTS, WAFERS, WASHERS AND MORE! SEE ALL PICTURES TO APPRECIATE THIS LOT!

771.LARGE GROUP OF DRYWALL NAILS

772.LARGE GROUP OF HARDWARE IN BIG GLASS JARS! LOOK AT THE PICTURES

773.LARGE GROUP OF DOUBLE HEADED AND 3 1/2" SINKER NAILS

774.Assort extension cord ends.

775.Organizer of electrical connectors and an organizer of grease zerks.

776.Large assortment of decking screws and fastners.

777.Box of trim head screws

778.Several boxes of drywall screws and a partial container of Senco flooring screws.

779.SPOTNAIL 7/16 crown staples 1 1/2" . 1 ful box, and 1 partial box.

780.Assorted Duo-Fast staples. 

781.Finish staples and nails.

782.Assorted nails, screws, door hanging supplies.

783.Assorted nails and Kerdi Board washers and screws.

784.Large assortment of 1/2 " and other large carriage bolts and concrete anchors.

785.2 partial bags of 1 1/2" pole barn screws, gray and white.

786.Assortment of sanding belts. 3" x 24". 

787.Large group of foam sealer, and caulking. 

788.Masking paper dispensers, and box of masking tape.

789.Glitter duster, and painting items, paint and paint stripper.

790.Drafting pencil sharpeners. 

791.Assorted tools, spark tester, Helicoil kit, slag hammer, small wrenches, etc.

792.Group of automotive supplies, compressor oil, cleaners, etc.

793.Group of assorted items, test lights and other types of testers, small soldering iron, etc.

794.Group of misc. hardware, padlocks, bungee cords, etc.

795.Safety glasses, hearing protectors, string trimmer line, etc.

796.Group of RCA cords, USB cords, coaxial patch cords, power supply cord, chargers etc.

797.30 stacking bins, some with small screws, nails, and other items.

798.Misc. cabinet hardware, shelf brackets etc.

799.Assortment of electrical supplies, boxes. switches and wire.

800.Box of sill seal foam, rope seal foam, roll of furnace air filter. 

801.partial roll of carpet shiel plastic, poly plastic and painters paper.

802.Box of flexible insulated ducting.
 

803.Box of misc. joist hangers, huricane brackets etc. 

804.1 pair of size 15 rubber boots.

805.New 50# box of Kleen Sweep sweeping compound. 

806.Misc group of T handle wrenches.

807.Several carpentry and DIY construction books.

808.DIY wiring and plumbing books.

809.Pilot flight training books, flight plan planning tools, Cessna 172 owners manual.

810.Smithsonian and great outdoors books.

811.Bird bath heater, small drain cleaning snakes, assorted sand paper.

812.2 paper shreaders, and waste paper basket.

813.Bucket full of ropes.

814.15 small pails.
 

815.Approximately 20 Provent attic vent chutes, and 1 roof vent.

816.5th wheel hitch parts,  and stakes

MC-Bid.com
Upcoming Auctions - Register to Bid - About Us - Contact Us - Contact
Copyright, 2017 mc-bid.com. All rights reserved.